• Skip to primary navigation
  • Skip to main content
Surface Engineering - Wear Resistance Specialists

Wear Resistance Specialists

An Intelligent Approach
To Wear Solutions

  • Home
  • Wear Modes
    • Abrasion
    • Erosion
    • Adhesion
    • Surface Fatigue
  • Consumables
    • Product Forms
    • Diamond EnhancedKRYPTONITE
    • Nickel Alloys SPECIALLOY
    • Cobalt Alloys PRIME
    • Alloy + Tungsten Carbide CARBORIDE
    • Carbide HVOF Powders VELOCITY
    • Tungsten Carbide
    • Tungsten Powders
    • Tungsten Rods
    • Iron Based Products
      • Ferro-Carboride AA Series
      • Hardfaced Wear Plate & Pipe
    • Thermal Spray Consumables
  • Processes
    • Welded Overlay Processes
      • MIG & Submerged Arc Hardfacing
      • TIG & Oxy-Acetylene Hardfacing
      • Laser Hardfacing
      • Plasma Transfer Arc (PTA) Hardfacing
    • Spray Overlay Processes
      • HVOF Spray
      • Plasma Spray
      • Twin Wire Arc Spray (TWAS)
      • Flame Spray
      • Manual Torch Powder Welding
    • Furnace Overlay Processes
      • Infiltration
  • Equipment
    • SE PTA 350 – PTA System
    • SE TW 400 – Twin Wire Arc Spray System
    • SE-JET 5000 – HP-HVOF Spray System
    • SP1100DP TAC System
    • Manual / Puddle Spray Torch
  • Resources
    • Hardness Conversion Chart
    • Coefficient of Thermal Expansion
    • Powder Mesh Size Comparator
    • Particle Size Distribution Chart
  • About Us
  • Contact
  • Hard Facing Wires and Rods
  • Plasma Spray Powders
  • Laser Cladding Powders
  • HVOF Thermal Spray Powders
  • TIG Welding Rods and Wires
  • MIG Welding Rods and Wires
You are here: Home / Wear Modes

Wear Modes

Abrasion

Abrasion

Requires hard sharp surface imposed on softer surface.
Erosion

Erosion

Requires fluid action.
Adhesion

Adhesion

Requires interaction between conforming surfaces.
Surface Fatigue

Surface Fatigue

Requires repetitive compressive stresses.
Surface Engineering - Wear Resistance Specialists

(727) 528-7998

info@surfaceengineering.com
     

2895 46th Avenue N.   •   St. Petersburg, FL 33714   |   Fax: (727) 528-7995

© 2015-2025 Surface Engineering, all rights reserved.

Site by Industrial Webworks

MENU
  • Home
  • Wear Modes
    • Abrasion
    • Erosion
    • Adhesion
    • Surface Fatigue
  • Consumables
    • Product Forms
    • Diamond EnhancedKRYPTONITE
    • Nickel Alloys SPECIALLOY
    • Cobalt Alloys PRIME
    • Alloy + Tungsten Carbide CARBORIDE
    • Carbide HVOF Powders VELOCITY
    • Tungsten Carbide
    • Tungsten Powders
    • Tungsten Rods
    • Iron Based Products
      • Ferro-Carboride AA Series
      • Hardfaced Wear Plate & Pipe
    • Thermal Spray Consumables
  • Processes
    • Welded Overlay Processes
      • MIG & Submerged Arc Hardfacing
      • TIG & Oxy-Acetylene Hardfacing
      • Laser Hardfacing
      • Plasma Transfer Arc (PTA) Hardfacing
    • Spray Overlay Processes
      • HVOF Spray
      • Plasma Spray
      • Twin Wire Arc Spray (TWAS)
      • Flame Spray
      • Manual Torch Powder Welding
    • Furnace Overlay Processes
      • Infiltration
  • Equipment
    • SE PTA 350 – PTA System
    • SE TW 400 – Twin Wire Arc Spray System
    • SE-JET 5000 – HP-HVOF Spray System
    • SP1100DP TAC System
    • Manual / Puddle Spray Torch
  • Resources
    • Hardness Conversion Chart
    • Coefficient of Thermal Expansion
    • Powder Mesh Size Comparator
    • Particle Size Distribution Chart
  • About Us
  • Contact